Cargo Shield® Air Cargo (3-D) liners are typically used inside an outer container. This container may be corrugated, molded plastic, molded Polystyrene (EPS) foam or most any other rigid-wall container. Cargo Shield® Air Cargo three-dimensional liners are available in a variety of stock sizes designed to fit frequently used stock corrugated and stock molded EPS foam containers.
For SDS (MSDS): See our Services Page
Custom sizes available. * Minimums may apply.
We also have Airline Owned Container Liners (See Below)
Size | Volume Cu. Ft. | Container | Qty / Case | Priced Per Each | Sold by Case | Wt. (Lb) / Case | |||
1 Case | 5 Case | 10 Case | ||||||
T60A1405 | 29 x 16 x 16" | 4.300 | EO Container | 12 | $17.68 | $16.30 | $15.00 | 10 |
T65A1410 | 35 x 21 x 21" | 8.900 | EH Container | 5 | $28.28 | $24.20 | $24.20 | 13 |
T60A1415 | 40 x 28 x 24" | 15.600 | E Container | 5 | $36.00 | $31.00 | $31.00 | 12 |
T60A1420 | 56 x 39 x 39" | 49.290 | D Container | 2 | $52.00 | $48.00 | $48.00 | 10 |
Airline Insulation Kits for Airline-Owned Containers are designed to protect temperature-sensitive products during air cargo shipping and storage. These liners effectively insulate products from heat and cold both on the ground and in the air. Order by the kit. Kits consist of Cargo Shield® sheets custom sized to fit the container's inside dimensions and, as applicable, adhesive foam blocks for attaching each liner piece to the container. One complete set per kit.
*Call for inquiries - Charts & Pricing coming soon
Other container liners available:
LD-2 Liner Kit: Includes top, sides, bottom and back/door sections and 25 self-adhesive spacers for attaching to inside of the LD-2 airline-owned container. Sheets are rolled and along with the spacers are packaged in clear poly tubing.
LD-3 Liner Kit: Includes top, sides, bottom and back/door sections and 25 self-adhesive spacers for attaching to inside of the LD-3 airline-owned container. Sheets are rolled and along with the spacers are packaged in clear poly tubing.
LD-11 Liner Kit: Includes top, sides, bottom and back/door sections and 25 self-adhesive spacers for attaching to inside of the LD-11 airline-owned container. Sheets are rolled and along with the spacers are packaged in clear poly tubing.
LD-9 Liner Kit: Includes top, sides, bottom and back/door sections and 25 self-adhesive spacers for attaching to inside of the LD-9 airline-owned container. Sheets are rolled and along with the spacers are packaged in clear poly tubing.
P9A Cover Kit: Includes top, bottom and side sections to completely wrap the P9A airline-owned pallet. Sheets are rolled and packaged in clear poly tubing.
LD-7 Cover Kit: Includes top, bottom and side sections to completely wrap the LD-7 airline-owned pallet. Sheets are rolled and packaged in clear poly tubing.
P6 Cover Kit: Includes top, bottom and side sections to completely wrap the P6 airline-owned pallet. Sheets are rolled and packaged in clear poly tubing.
Foil is used in many ways to maintain and preserve freshness and act as a barrier. But its main use is to reflect and reduce energy consumption. Thermal Shield® is built to fight the three basic modes of heat transfer.